Kohler K-3082 Guia De Instalacion página 8

1. Attach the Cabinet
Make sure all connections have been made if you are mounting
multiple cabinets together.
NOTE: No more than three cabinets should be mounted together at
the time of installation.
Be sure the electrical wire is in position and can be reached from
the front of the cabinet so electrical connections can be made.
Remove the electrical box screw(s) and remove the cover.
Set the bottom channel of the cabinet in the "Z" mounting bar.
Feed the electrical wire through the cabinet electrical area. Be sure
you have enough wire exposed to make the connections.
CAUTION: Risk of personal injury or product damage. This
cabinet is very heavy. Get help lifting the cabinet into place.
NOTE: Use the supplied anchors to attach the cabinet if it will not
be fastened to a brace or stud.
Position the top clips and drill the holes through the wall. If the
brace is not being used, align the top clips with stud(s). Fasten
the clips securely using #10 x 2" screws.
Make the electrical connections and reattach the electrical cover.
1010988-2-C 8 Kohler Co.