TwoNav Anima+ Guía Rápida página 3

Settings > System > Keys'.
Mounting
Device cradle
1 2
Accessories ANT+™ (only compatible devices)
Once the sensors are mounted on your bike, follow these
steps to start paring information:
1. Open 'Data page' ('Page' key) and search for 'Effort' data
fields (heart rate, cadence).
2. Make a long press on the field that you want to activate
(heart rate sensor, cadence sensor or speed sensor).
3. Select 'Enable FC / Cad / VeS'. TwoNav starts looking for
the sensor signal, if it is available, it will be displayed.
Files is also stored for each recorded track point.
Note: Add other data fields such as sensor speed by
3
Click!
pressing 'Change field' on any existing field.
Recharge and autonomy
You can recharge the battery of the GPS device by
connecting the device to the USB charger included in the
product box. Battery life can be increased by reducing the
level of screen backlight or by turning the screen off when
not in use (short press on 'ON / OFF' key). TwoNav features
several power modes that automatically adjust options
such as off-screen, brightness or refresh of GPS position.
Configure these options in 'Main menu > Settings'.
Batteries and other accessories can be bought from:
www.TwoNav.com
Care
Never submerge the device in water, not even when all
lids are sealed. Avoid vibration or harsh movements while
USB port is connected. Vibrations may deform the USB port
whose repair is excluded from the warranty.
Start / Shutdown / Block
In order to turn the device on, press 'ON / OFF' key for a
few seconds. TwoNav will automatically search for satellites.
When a strong enough signal is available, the status icon
3