For U.K. users only : additional information
and instructions
WIRING INSTRUCTIONS
WARNING : ALL APPLIANCES MUST BE EARTHED
IMPORTANT : the wires in this lead are coloured in accordance with the
following codes.
Green and Yellow
Blue
Brown
Connect the Green/Yellow wire to the terminal in the
plug marked "E" (or by the earth symbol) or coloured
Green.
Connect the Brown wire to the terminal in the plug
marked "L" or coloured Red.
Connect the Blue wire to the terminal in the plug marked "N" or coloured
Black.
Seek professional advice if you are unsure of the correct procedure for
the above.
ABOUT YOUR FACTORY FITTED PLUG
The cord is already fitted with a plug incorporating an appropriate fuse.
If the plug does not fit your socket outlet, see paragraph below. Should
you need to replace the fuse in the plug supplied, an appropriately rated
approved BS 1362 fuse must be used (refer to electrical specification for
fuse rating).
If the plug supplied does not fit your socket outlet, it should be removed
from the mains lead and disposed of safely. The flexible cord insulation
should be stripped back as appropriate and a suitable alternative plug
fitted. The replacement plug must be equipped with an appropriate fuse.
If the plug has external access to the fuse (non-rewirable type plug)
please note that the fuse cover is an important part of the plug. Please
ensure that it is always refitted correctly. If you lose this cover, please
do not use the plug. You may contact our helpline for a replacement.
For any problems or queries, please contact our helpline :
0845 602 1454 - UK (calls charged at local rate)
(01) 412 3000 - Ireland
All manuals and user guides at all-guides.com
: Earth
: Neutral
: Live
N: Blue
E: Green and
or black
yellow or green
L: Brown
or red
Fit correct
fuse(13 amp)
Use cable
gripper