Sony 100Z9D Información Para La Instalación página 6

Never install the TV as shown below:
Note
• If you intend to route the cables in the wall, make a hole in the wall to insert the cables before beginning the installation.
3
Attach the screw
of the TV (to make it parallel with the wall).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the pulley when attaching them to the TV.
6 (US)
Air circulation is blocked.
and pulley (supplied with the TV) to the rear
Wall
PL