Dell PowerEdge FC830 Manual Del Propietário página 58

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the cooling shroud retention bar to replace a faulty retention bar or service other components
inside the system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #1 and #2 Phillips screwdrivers ready.
4. Remove the cooling shroud.
Steps
1. Remove the screws securing the cooling shroud retention bar to the system.
2. Hold the cooling shroud retention bar on the side of the chassis and lift it away from the system.
Results
Figure 11. Removing the cooling shroud retention bar
1. screw (9)
2. cooling shroud retention bar
3. standoff (2)
Next steps
1. Install the cooling shroud retention bar.
2. Follow the procedure listed in the After working inside your system section.
Related references
Instrucciones de seguridad
Related tasks
Before working inside your system
Removing the sled on page 51
Installing the cooling shroud retention bar
Después de trabajar en el interior de su equipo
58 Instalación y extracción de componentes del sled
on page 50
on page 51
on page 59
on page 51