Dell PowerEdge FC830 Manual Del Propietário página 104

Installing a hard drive or SSD blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove a hard drive or SSD.
Steps
Insert the hard-drive or SSD blank into the hard drive or SSD slot until the release latch clicks into place.
Figure 47. Installing a 2.5-inch hard-drive blank
a. hard drive or SSD blank
b. release latch
Figure 48. Installing a 1.8-inch SSD blank
a. SSD blank
b. release latch
104 Instalación y extracción de componentes del sled