Blade Sharpening - Fimar EASY LINE HBS220JS Manual Del Usuario

Operation Instruction
1. The machine should be installed on a work surface that has sufficient stability and strength to support the
weight of the machine.
2. Make sure that the line voltage of your main power source matches the rated voltage of the machine .
3. Turn the switch on and let the machine race about 2-3 minutes look if the machine works well.
4. Turn the switch on, the lade rotate on the opposite way of watch hands.
5. Adjust the slice thickness by turning the slice thickness regulator on the opposite way of watch hands. And
turn the fixing positioner knob on the opposite way of watch hands. Make the fixing positioner head get in touch
with the plate.
6. Pushing the product carriage forward and back over the blade with a continuous motion, using the product
pusher handle and the pusher knob.
7. After slicing the desired amount of the zero position. Turn the fixing positioner knob and let the fixing
positioner head back to the original position
8. You can now move away the slices and the product.
Blade Sharpening:
1
. You ought to sharpen the blade when the slice thickness not even or the slices broken not piece.
2. Clean the edge of blade before sharpening.
3. Pull the sharpener out and lubricate the sharpener axles as it works well.
4. Pull the sharpener out and turn 180º, press the right side stone down by finger then put the sharpener to the
working position.
5. Make sure that the surface of stone is
nesting closely to the surface of edge. If not, please adjust it.
6. Turn the power on and the blade work 1-2 minutes, stop the machine look if the blade is sharpened well, if
not, continuous.
7. Press the left side stone down and make sure the surface of stone is nesting closely to the surface of blade,
then sharpen 3 seconds to remove the burr.
8. Put the sharpener back to the original position after work.
9. Always keep the stone clean as the stones work well.
10.Do not make your eyes look right to the way that the stone rotate in order to the hurt from the piece of the
stone.
KEEP OUT OF CHILDREN'S REACH
4