Important
Safety
This equipment contains heat sensitive
components. Maximum ambient tem-
perature must not exceed 35° Celsius
• Humidity in rooms where this equi-
pment is situated must not exceed a
hygrometric level of 85 %. If you have to
use your equipment outside, avoid expo-
sing it to rain water or to splashes. The
transition from a cold environment to a
hot one may cause condensation. Allow
it to dry by itself before re-starting the
equipment • In the event of prolonged
absence, switch off the equipment by
means of the on/off switch. Even when
switched off, certain components remain
live. In order to insulate it completely
you must remove the plug from the main
electricity supply • In the event of an
electrical storm, it is advisable to discon-
nect the equipment from the electricity
supply so as to avoid potentially dama-
ging electrical or electromagnetic surges.
To this end, make sure that the mains
plug is easily accessible for disconnection
• Disconnect the equipment immediately
if you detect a smell of burning or smoke.
Under no circumstances must you open
the equipment yourself; you run the risk
of electrocution.
Maintenance
Clean the equipment with a soft cloth and
a neutral detergent. The use of solvents,
abrasive products or alcohol-based pro-
ducts is likely to damage the equipment.
Regulations
This equipment must only be installed
inside. Its use is restricted to private radio
transmission. Connection to a public or
independent network, or to an outside
aerial is prohibited.
All manuals and user guides at all-guides.com
Under no circumstances should this
appliance be put to industrial use. It is
designed solely for domestic operation.
Technical characteristics
Power supply
Transmission channels
Depending on the country the transmis-
sion channels and frequencies will vary
Transmitter power
Transmitter range
Inside a typical lodgment the range will
be less because of signal attenuation by
building material absorption.
1
THOMSON disclaims all responsibility in the
event of use that does not comply with the
present instructions.-
• Transmitter: 6V DC
• Receiver: 6V DC
• A = 2.414 GHz
• B = 2.432 GHz
• C = 2.450 GHz
• D = 2.468 GHz
• 10 mW
• About 10 meters in free fields.
EN
EN