Completing The Configuration - Dell PowerVault NX1950 Guia De Instalacion

4 In the Connection Settings window, click Save As.
5 In the Save As dialog box, enter the file name you would like to use
for the connection, and leave the extension as .rdp.
6 In the Save in drop-down menu, select Desktop, and then click Save.
For more information about configuring your Remote Desktop
Connection see "Remote Desktop Connection" on the Microsoft website
at http://go.microsoft.com/fwlink/?LinkId=69058 or see the
Windows Unified Data Storage Server 2003 Help.
Remote Web Administration
You can remotely access a server running Windows Unified Data Storage
Server 2003 from a client system by using a browser. For systems running
a Windows operating system and Internet Explorer 6 (or later), use the
Remote RDP Client ActiveX control. The ActiveX control is synonymous
to the Remote Desktop Connection, MSTSC.

Completing the Configuration

After cabling the solution and setting up network addresses for the
storage system, you must perform the following steps to complete
the configuration of the PowerVault NX1950 storage solution.
Before you configure the system and storage arrays, ensure that:
• The PowerVault NX1950 storage system and the storage arrays are
cabled correctly as shown in "Cabling the Solution."
• The storage arrays are turned on before the PowerVault NX1950 storage
system is turned on.
After the PowerVault NX1950 storage system is turned on:
1 The "Dell Storage Initialization Wizard" launches and enables you
to configure the storage arrays.
2 The "PowerVault NX1950 Initial Configuration Tasks Wizard" launches
and enables you to configure the PowerVault NX1950 storage system.
NOTE:
You must configure the storage arrays and the PowerVault NX1950
storage system using the wizards before you can manage the storage solution.
16
Installation Guide
All manuals and user guides at all-guides.com