Accessing The Powervault Nx1950 Storage Solution From A Client System - Dell PowerVault NX1950 Guia De Instalacion

All manuals and user guides at all-guides.com
Configuring IP Addresses and DNS
After connecting to the SAC prompt, you can use netsh to configure
network addresses, default gateways, and DNS for a network interface on a
storage server, after which you can connect remotely to the server and use
the GUI to complete other initial configuration and other management tasks.
To set the static IP address you must know the IP address, subnet mask,
and gateway address.
1 Obtain the list of available interfaces by typing the following:
netsh interface ip show interface
2 Identify the interface(s) that are displayed as Connected.
3 Set the IP address for the desired interface by typing the following:
netsh interface ip set address name=<interface>
source=static addr=IP address mask=
<subnet mask> gateway=<gateway address>
4 Set the DNS address by typing the following:
netsh interface ip set dns name=interface
source=static addr=<dns address>
NOTE:
If you are using an interface name that includes spaces, place the text
in quotation marks. For example, "local area connection".
For more information about the netsh command, see "Scripting Tools" on
the Microsoft website at http://go.microsoft.com/fwlink/?LinkId=66414
or see the Windows Unified Data Storage Server 2003 Help.
Accessing the PowerVault NX1950 Storage Solution
From a Client System
After configuring the network addresses for your PowerVault NX1950
storage solution, you can connect to it remotely using one of the features
listed in this section.
Installation Guide 13