Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.3 Warranty
Warranty card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and retum to vendar with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: lf you cannot find the warranty card within the
documentation,youmust ask for it through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired otherthan themanufacturer.
5.4 Disposal and recycling
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment
national right,power tools that are no longer
usable must be collected separately and
disposed of in an environmentally correct
manner.
Subject to change wlthout notlce.
6. Regulations
6.1 Technical Data
= Power input.
= Suction capacity.
= Container capacity.
= Flow.
= Cable length.
= Pipe diameter.
= Weight.
L
= Sound power level.
WA
and
its
implementation
ENGLISH
14
L
= Sound pressurelevel.
PA
= Vibration.
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
Noise Vibration Information
Measured values determined according to EN 23 744
(1.60 m height, 1 m distance).
Typically the A-weighted sound pressure level of the
product is 69 dB (A).
Wear hearing protection!
Total vibration Ah values (vector sum of three directions)
and uncertainty K determined according to EN 60745:
a
= 4 m/s
, K <1.5 m/s
into
h
2
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in EN
60745 and may be used to compare one tool with another.
lt may be used for a preliminaryassessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is used
for different applications,with different accessories or
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure leveloverthe
totalworking period.
An estimation of the levelof exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce theexposure leveloverthetotal
working period.
ldentify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories,keepthe hands warm,organisationof
work pattems.
14
2
Tabla de contenido
