Tabla De Contenido; Specific Safety Instructions; Instructions For Use; Placement - stayer VAC2050C Manual De Instrucciones

This manual is consistent with the date of manufacture of
your machine, you will find information on the technical
data of the machine acquired manual check for updates
of our machines on the website: www.grupostayer.com
For Your Safety
Working safely with this machine is possible
only when the operating and safety information
are read completely and the instructions
contained therein are strictly followed.
1. Contents
2. Specific safety instructions ........................... 12
3. Instructions for use ........................................ 12
3.1 Placement ........................................................... 12
3.2 Assembly............................................................. 12
3.3 Ilustrated description ........................................... 12
4. Operating instructions ................................... 13
4.1 Placement and testing ........................................ 13
4.2 Tool change ......................................................... 13
4.3 Tuning operations ............................................... 13
4.4 General Instructions for use ................................ 13
5. Maintenance and service instructions ......... 13
5.1 Cleaning .............................................................. 13
5.2 Repair service ..................................................... 14
5.3 Warranty ............................................................. 14
5.4 Disposal and recycling ........................................ 14
6. Regulations ..................................................... 14
6.1 Technical Data .................................................... 14
6.2 EU declaration of conformity. .............................. 15

2. Specific safety instructions

Never vacuum: hot ash , liquid or explosive vapors,
undiluted acids and solvents, mud, gasoline, thinners for
varnishes and fuel oil, flammable or toxic liquids, such
as "toner" photocopiers or other volatile substances
(substances that entrained vortex with air drawn, can
cause explosive vapors or hazardous mixtures), acetone,
acids and solvents undiluted (substances that corrode
the material used in construction of the apparatus), coal
burning or the like asbestos or asbestos dust .
- Avoid this vacuum cleaner placed very close to sensitive
organs such as ears, mouth, eyes, wear appropriate
protection for these.
- Do not leave the vacuum cleaner without custody of
children or people with disabilities to use .
- Never leave the plug connected to the network
unnecessarily if you are not using .
- When cleaning, maintenance or in case of replacement
parts, switch off the engine and remove the mains plug.
ENGLISH
12

3. Instructions for use

The unit is intended for pick-up and vacuuming of non
hazardous materials and non-flammable liquids. BIA filter
category C.

3.1 Placement

Place the apparatus in its working position; when
necessary, fasten it by means of chain 14 that is located
at the bottom portion of the machine.
Check the filling level of the dirt tank before
page
starting to work and empty the tank if necessary.
Make sure that you correctly insert the dust
collecting bag 11 so as to allow the machine
to operate.

3.2 Assembly

Do never remove the dust collecting bag 11
as the vacuum cleaner will not work without
it; it must be there for suctioning both dry and
liquid matter.
Unlock the latches 10 and remove the vacuum top 3.
Make sure that the collecting bag 11 is well seated along
its whole length against the inner wall of the tank 9.
Reattach the vacuum top 3.
Secure fasteners 10.
Insert suction hose 8 into housing 7, such that it remains
firmly fastened and turn it clockwise up to the stop.
Firmly fit suction tubes one 8 in the other 17. Flexible drain
tube 13 must be mounted in housing 16 so that it may
suction liquids.
3.3 Illustrated description
1. Transport base.
2. Transport handle.
3. Upper part of vacuum cleaner (motor).
4. Switch.
5. Power outlet for electrical tools.
6. Wheels.
7. Housing for suction hose (fitting).
8. Suction hose.
9. Tank.
10. Fasteners.
11. Dust collecting bag.
12. Fluted filter.
13. Flexible drain tube.
14. Static load chain..
15. Tank lock/unlock.
16. Housing for drain hose.
17. Telescopic tube.
18. 2-position brush.
19. Round brush.
20. Flat nozzle.
12