Bresser MyTime Travel Instrucciones De Uso página 21

Sensor function
1. Press CH button to set the channels 1 to 3 for each
transmitter if you wish to connect more than one
transmitter with the main unit.
2. Press °C/°F to change the temperature display of
the transmitter
3. Once the weather station receives radio signals
from the sensors, the alternating temperature
values of the different channels will be updated on
the weather station every 1-2 minutes.
TROUBLESHOOTING
Signal disconnection
If without obvious reasons the display of the outdoor
temperature goes blank, please check the following:
1. The remote unit is still in place.
2. The batteries of both the remote unit and main unit
are not empty. Replace batteries with new ones if
necessary.
Note: When the temperature falls below freezing point,
the batteries of outdoor units will freeze, lowering their
voltage supply, effective range, and life span.
3. All units required are within range and the path is
All manuals and user guides at all-guides.com
Transmission collision
Signals from other household devices, such as door
bells, home security systems and entry controls,
may interfere with those of this product and cause
temporarily reception failure. This is normal and does
not affect the general performance of the product. The
transmission and reception of temperature readings
will resume once the interference recedes.
SPECIFICATIONS
Measurement
Indoor temperature range: 0~50° C
Outdoor Temperature Range: -20~60° C
Resolution for temperature: 0.1° C
Humidity range: 20~90%
Resolution for humidity: 1%
Transmission
Transmission range between transmitter and main unit:
30meters (in open area)
Radio frequency: 433.92 MHz
clear of obstacles and interference. Shorten the
distance if necessary.
DE
GB
FR
IT
ES
21