Nemaxx FCA35X Manual De Usuario página 7

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
STEP 1
Carefully remove awning from the carton box and take off the polystyrene.
Remove plastic bag from the awning and place the awning set flatwise, ensuring the unit
will not become scratched, damaged or dusty.
Decide the height you intend to install the awning onto the wall.
If fitting above a patio door, this should ideally be at least 20cm above, if there is sufficient
space.
The approximate total drop of the awning differs from the top height.
Height of the top
A (total drop)
The angle of drop can be slightly adjusted after fitting, but the most ideal angle is pre-set at
the factory and should not require any factory and should not need major adjustment in the
process of using.
The diagram below shows the drop of the awning after the awning has been fully opened.
A
Total drop
Front bar height
≥ 2.5m
All manuals and user guides at all-guides.com
EN
2.5m - 4m
30 cm
7
KEN001VKM
v03 • 07.09.2017
4.5m - 6m
50 cm
Top of wall
bracket height
loading

Este manual también es adecuado para:

Fca40xFca45xFca50xFca60x