Tabla de contenido
Idiomas disponibles
Idiomas disponibles
prODUct SpeciFicatiOnS
Motor ............................................................... 19.2 Volt DC
Drive Shank ........................ 1/2 in. Square Socket Adaptor
Switch .............................. VSR (Variable Speed Reversible)
KnOw YOUr impact wrench
See Figure 1, page i.
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
DriVe ShanK
The square 1/2 in. drive shank provides easy installation
and removal of sockets by pushing them on or pulling
them off the shank.
DirectiOn OF rOtatiOn SeLectOr
(FOrwarD/reVerSe/center LOcK)
Your impact wrench has a direction of rotation (forward/
reverse/center lock) selector located above the switch
UnpacKinG
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
warninG:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
All manuals and user guides at all-guides.com
FeatUreS
No Load Speed ..................................0-3,000 r/min. (RPM)
Torque .................................................................... 200 ft.lb.
Impacts Per Minute .................................................0-3,000
trigger for changing the direction of shank rotation. Setting
the direction of rotation selector in the OFF (center lock)
position will lock the switch trigger to help reduce the
possibility of accidental starting when not in use.
LeD wOrKLiGht
The LED worklight, located on the front of the tool, illuminates
when the switch trigger is depressed. This provides extra
light for increased visibility.
VariaBLe SpeeD
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with de-
creased trigger pressure.
aSSemBLY
pacKinG LiSt
Impact Wrench
Operator's Manual
7 - English
warninG:
If any parts are damaged or missing do
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
warninG:
Do not attempt to modify this product
or create accessories not recommended for use with
this product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
warninG:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the product when assembling
parts.
Tabla de contenido
