Baker Hughes Druck ADTS 542F Manual Del Usuario página 5

2. ADTS Touch
The ADTS Touch is used to control all required functions. The ADTS Touch can be positioned on
the ADTS or used as a hand held mobile unit via a cable or Bluetooth® wireless technology.
The ADTS Touch will have power applied when:
• Positioned (docked) (1) on a powered-on ADTS.
• Using an umbilical cable connected to a powered-on ADTS.
• Powered from its own battery pack.
• Powered from a universal power supply unit
The ADTS Touch is equipped with an On/Off switch (2) and USB connectors for connection to a
PC or mass storage device (3).
Figure 2: Touch On/Off Switch and USB Connectors
Connector (4) allows connection between the base unit and the ADTS Touch using a 5 metre or
18 metre umbilical cable.
Note: Only use cables that have been supplied by or purchased from Druck.
Figure 1: ADTS Touch Docking Connector
2 3
1
Copyright 2014 Baker Hughes Company.
English–ADTS Safety and Installation Guide | 3