TaoTronics TT-CL009 Instrucciones De Montaje página 4

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
Assembling the Lamp
1
1. Thread the wire through the hole on the base
2. Hold tight the lamp pole with one hand, lift the base upside down
3
3. Align and mount the washer
4. Washer is well mounted with all the corners aligned
5
5. Mount the screw nut onto the washer
6. Hold tight the lamp pole while tightening the nut with the included
wrench
2
7. Connect the wires, make sure the terminals perfectly t in place
8. Cover up the hole and rotate the cover clockwise to lock in place
1
4
9. Remove the double-sided tape protectors on the inner lamp shade,
patch the 3 pieces together in sequences as labelled
10. Squeeze the inner lamp shade into the outer shade, stretch them to
form a circular shape
Note: Do not wash the outer shade.
6
11. Move the outer shade around to align with the 3 holes with that of the
inner shade for the support frame
12. Insert the separate bar into the frame support ring to set up the shade
support frame
7
9
11
8
10
12
01/02
Tabla de contenido
loading

Tabla de contenido