Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FEATURES
CARACTERÍSTICAS
7
3
2
4
1
FEATURES
1. Light Mode Select Button
2. 12VDC Power and Charging Port (for use of 12 volt DC
Adapter)
3. Battery/Charge Status LED Indicator
4. AC to DC Charging Port (for use with AC Charging Adapter)
5. Pistol Grip Handle
6. On/Off Trigger
7. Rubber Bezel
8. Swing-up Stand
9. Ventilation Slot
10. Trigger Lock
11. 120 Volt AC Adapter
12. 12 Volt DC Adapter (optional accessory)
LIONHAL_LIONHALS_ManualENSP_073015.indd 2-3
8
9
10
6
5
11
CARACTERÍSTICAS
1. Modo de luz botón de selección
2. Puerto de recarga e poder de CC (para usar con adaptador
de 12 voltios CC)
3. Indicador LED del estado de la batería/de la carga
4. CA a CC puerto de carga (para su uso con adaptador de
carga CA)
5. Apretón manija de pistola
6. Disparador de encendido/apagado
7. Bezel de goma
8. Soporte plegable
9. Ranura de ventilación
10. Cerradura del disparador
11. Adaptador de 120 voltios CA
12. Adaptador de 12 voltios CC (accesorio opcional)
2
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user' s authority to operate the equipment.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in
property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be followed to reduce the
risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. Manufacturer strongly recommends
that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all
warnings and operating instructions before using any tool or equipment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all instructions before operating light. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
12
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth
defect or other reproductive harm. Wash hands after handling.
WARNING: RISK OF FIRE, ELECTRIC SHOCK, BURST HAZARD, OR INJURY TO PERSONS – WHEN USING ELECTRICAL
APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
• Turn off/unplug and allow to cool before replacing the Halogen bulb.
• Halogen bulb gets HOT quickly!
• Do not touch the bulb at any time when operating.
• Only contact switch/plug when turning on.
• Do not touch hot lens or enclosure.
• Do not remain in light if skin feels warm.
• Use only with a 11 volt/40 watt or smaller Halogen bulb.
• When changing bulb, use a soft cloth. Oil from skin may damage bulb.
• Do not operate the spotlight with a missing or damaged lens or enclosure.
WARNING – WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
• To reduce the risk of injury, close supervision is necessary when the spotlight is used near children.
• Use only attachments recommended or sold by the manufacturer.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not put the spotlight in water or other liquid. Do not place or store the spotlight where it can fall or be pulled into water or
become wet.
• Charge indoors only. Do not expose charger to water or any other liquid.
• Do not clean this appliance with a water spray or the like.
• Use only the chargers supplied by the manufacturer to charge and recharge.
READ ALL INSTRUCTIONS
3
7/30/2015 10:46:09 AM
Tabla de contenido
