Speaker Connections - Kohler K-99696-NA Manual Del Usuario

3. Speaker Connections

Series Connection - 4 Ohm
+ - - +
+ -
R
Speaker Terminal
NOTE: This amplifier allows 2- or 4-speaker stereo output. Refer to the connection
diagram above for your wiring configuration.
NOTE: The speaker terminal will accept a 12-24 AWG wire. Follow local codes for
routing speaker wires.
Disconnect the power from the amplifier.
Using a wire stripper, remove approximately 1/2" (13 mm) of insulation from the
speaker wire.
Insert the wire into the appropriate positive (+) or negative (-) and right (R) or left
(L) terminal connector.
Repeat for the remaining speaker wires.
Reconnect the power to the amplifier.
Verify that the status LED light turns on.
Kohler Co.
+ - - +
- +
L
+
+
Parallel Connection - 8 Ohm
+ -
Or
+
-
-
+
-
-
R L
9
- + + -
+ - - +
R L
1476138-2-A
- +