Kohler K-99696-NA Manual Del Usuario página 8

2. DTV+ System Layout
AC
Power
Controller
Digital
Valve(s)
The amplifier can be controlled digitally when connected to the K-99695 system
controller. The controller powers the interface(s) and controls the amplifier and
other system components.
NOTE: A data cable is provided to connect the amplifier to the controller. If the
amplifier is not within 6' (1.83 m) of the controller, obtain a longer Ethernet-style
cable or add an extension cable.
Disconnect the power from the amplifier and the controller.
Connect one end of the data cable into the port on the back of the amplifier.
Connect the other end of the cable into one of the eight grouped component ports
on the controller.
Reconnect the power to the amplifier and the controller.
Before Operating the DTV+ System For the First Time:
Download and install the latest software for connected components. This may
take an hour or more to complete based on system configuration and internet
connection speed. Do not disconnect the power from any components during
software download and installation.
For more information on system setup and operation, refer to the guide on the
controller product page at kohler.com.
1476138-2-A
6' (1.83 m) Data Cable
Component
Cable
Connections
Router
AC Power
8
Interface
(Up to Three)
Speakers
Amplifier
Kohler Co.