Kohler K-99696-NA Manual Del Usuario página 10

Operation
3.5 mm
Line-In (1)
LED
Front
NOTE: Set your music device to a midrange volume after connecting to the amplifier,
but before sending an audio signal from the device.
Status LED Light
Yellow = standby mode.
Blue blink = standby mode with BLUETOOTH® connection.
Blue = audio input from a BLUETOOTH device.
Green = audio input from the front or back 3.5 mm line-in port.
3.5 mm Stereo Input
A wired audio device can be connected to either the front or back line-in ports.
The front line-in port (1) will override the back port (2).
Once a signal is detected from the device, the LED will turn green and the audio
input will fade in.
If the LED does not turn green when the device is turned on, increase the volume
on the device.
Audio input may be slightly delayed when a device is initially connected.
Wireless Input
Once a BLUETOOTH device is connected, the LED will blink blue.
The amplifier will display on the device as "Kohler KA02."
1476138-2-A
3.5 mm
Line-In (2)
Speaker
Terminal
3.5 mm
Line-Out
10
DTV+ Data
Cable
Power
Cable
Back
Kohler Co.