Blanco BLANCOMASTER-S Duo Control HD Información Tecnica Sobre Producto página 6

EinbauMasterControl
GB
Technical Product Information BLANCOMASTER Duo Control-S HD / BLANCOMASTER Control HD
Parts list BLANCOMASTER-S Duo Control HD
1 Lever
2 Screw for lever
3 Cap for lever
4 Cartridge lock nut
6 Cartridge
7 Spout
9 Base
10 Mounting set
11 Flexi-hose
12 Jet regulator
13 O-ring
14 Plastic ring
15 Seal flexi-hose
16 Nonreturn head
17 Nonreturn head complete
18 Holding screw spout
19 Spray hose
20 Weight
21 Hose spray
23 Seal spray hose
24 Valve connection
25 Valve BLANCOMASTER-S Duo
26 Mounting set hand spray
27 Connector spray head
28 Perforated disk spray head
29 Attachment spray head
30 Drawbar with guide pipe
31 Control element for outlet remote control
Technical Data
Fields of application
• Pressurised hot water tank
• Thermally-controlled instantaneous water heater
• Hydraulically-controlled instantaneous water
heater
It is not possible to operate the tap with low-
pressure hot water tanks (open boiler).
Operating pressure
• Min.
• Max.
• A pressure reducer must be installed above
5 bar in order to comply with Noise Class I.
Temperature
• Max. (hot water inlet)
• Recommended (energy saving) 60° C
• Water connection: hot-left / cold-right
4
13.07.2005 16:55 Uhr
1
0,5 bar
10 bar
70° C
Seite 7
Parts list BLANCOMASTER Control HD
1 Lever
2 Screw for lever
3 Cap for lever
4 Cartridge lock nut
6 Cartridge
7 Spout
9 Base
10 Mounting set
11 Flexi-hose
12 Jet regulator
13 O-ring
14 Plastic ring
15 Seal flexi-hose
30 Drawbar with guide pipe
31 Control element for outlet remote control
Note
Pressure differences of more than 3 bar between
cold and hot water connection must be avoided
since, otherwise, the mixing ratio of hot and cold
water can deviate considerably from the lever
position.
2