Assembly Step - ultega RACER 150 Manual De Uso

ASSEMBLY STEP

Step 1
• Attach the front stabiliser (3) to
front curve plate of main frame (1)
using 2 x carriage bolts (13), acr
washers (21) and cap nuts (23).
• Attach the rear stabiliser (2) to
rear curve plate of main frame (1),
using 2 x carriage bolts (13), arc
washers (21) and cap nuts (23).
Step 2
• Take the front post (5) and connect
the middle sensor wire (19) with lower
sensor wire (25).
• Release the tension knob with upper
tension cable (24) on the front post (5)
then connect with the lower tension
cable (14).
• Insert the front post (5) into the main
frame (1) and tighten with 4 x allen
bolts (15) and curve washers (21).
All manuals and user guides at all-guides.com
US
7
www.ultega.net
24
24
14
14
1. 2. 3.