Computer Function - ultega RACER 150 Manual De Uso

COMPUTER FUNCTION

KEY FUNCTIONS
MODE
SET
CLEAR (RESET)
ON/OFF (START/STOP) The key to pause the signal input by pressing the key.
SPECIFICATIONS
TIME 00:00 ~ 99:59
SPEED (SPD) 0 ~ 99.9KM/H (ML/H)
DISTANCE 0.00 ~ 999.9KM (ML)
OPERATION PROCEDURES
The system turns on when any key is pressed or when it sensor an input from the
speed sensor.
AUTO ON/OFF
The system turns of automatically when the speed has no signal input or no key are
pressed for approximately 4 minutes.
The unit can be reset by either changing battery or pressing the MODE key for 3
RESET
seconds.
To choose the SCAN or LOCK if you do not want the scan mode, press the MODE key
MODE
when the pointer on the function you want which begins blinking.
FUNCTIONS
Press the MODE key until pointer lock on to TIME. The total working time will be shown
TIME
when starting exercise.
Press the MODE key until the pointer advance to SPEED. The current speed will be
SPEED
shown.
Press the MODE key until the pointer advance to DISTANCE. The distance of each
DISTANCE
workout will be displayed.
Press the MODE key until pointer lock on to CALORIE. The calorie burned will be
CALORIE
displayed when starting exercise.
Press the MODE key until the pointer advance to ODOMETER. The total accumulated
ODOMETER
distance will be shown.
Press the MODE key until the pointer advance to PULSE .User's current heart rate will
PULSE be displayed in beats per minute. Place the palms of your hands on both of the contact
pads, and wait for 30 seconds for the reading.
SCAN Automatically display changes every 4 seconds.
BATTERY
If improper display on monitor, please reinstall the batteries to have a good result.
All manuals and user guides at all-guides.com
This key lets you to select and lock on to a particular function you want.
Can to proceed the data establish for "TIME" "DISTANCE" "CALORIES" "PULES".
The key to reset the value to zero by pressing the key.
CALORIES
ODOMETER (ODO)
PULSE (PUL)
US
0.0 ~ 999.9KCAL
0 ~ 9999KM (ML)
0,40 ~ 240BPM
10
www.ultega.net