Worx LithiumDrive WU252 Manual Del Usuario página 8

screwdriver onto the battery charger, the indicator
(Red) will illuminate during charging.
Let the battery charge for 5~7 hours. The battery is
fully charged as soon as the indicator is no longer
lit. Then unplug the charging plug from the socket
and remove the screwdriver from charger, the
screwdriver is ready to use.
Important: When charging, the charger and
screwdriver may become warm to the touch, this is
normal and does not indicate a problem.
OPERATING INSTRUCTIONS
Inspect the screwdriver before using to ensure
all parts are running smoothly and there are
no abnormal sounds or sparks. Before driving
8
fasteners, check behind walls for wire, other
electrical hazards or plumbing.
1. Fitting and removing bits
To use any one of the short bits supplied, insert the
bit into the chuck (1). To remove the bit, simply pull
it out of the chuck (1). (See Fig.B)
2. How use the connecting bit holder (10)
To use the connecting bit holder, insert the bit (7)
into it and then into the chuck (1). (See Fig.C)
3. Forward/reverse switch (See Fig D)
For drilling and screw driving use forward rotation
marked " " (lever is moved to the left). Only use
13L-WU252-M-070228-FÓïCE´¦ÐÞ¸Ä.indd 8
All manuals and user guides at all-guides.com
reverse rotation marked "
the right) to remove screws or release a jammed
drill bit.
4. Fully automatic spindle locking (Auto-
lock)
The screwdriver chuck (1) is locked when the on/off
switch (2) is not pressed.
This enables screws to be screwed in, even when
the battery is empty and allows for the machine to
be used as a manual screwdriver.
Important: When using as a manual tool, do
not press the On/Off switch (2). Otherwise the
screwdriver can be damaged.
5. Using the sight light (9) (See Fig E)
The sight light allows you to keep a clear view
under less illuminated circumstances. To turn on
the light simply press the on/off switch. When you
release the on/off switch, the light will go out.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
" (lever is moved to
Warning: Never change the direction
of rotation when the chuck is rotating,
wait until it has stopped !
2007-3-5 15:55:13