Linksys RE3000W Manual Del Usuario página 96

Linksys Wireless-N Range Extender
Connecting devices to your network through the
extender
Choose from the methods below to connect devices that support Wi-Fi
Protected Setup to your network.
NOTE
Repeat the instructions for each client device that supports Wi-Fi
Protected Setup.
Connecting with the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
1. Press the Wi-Fi Protected Setup button on the client device.
2. Click the Wi-Fi Protected Setup button on the extender's Wi-Fi Protected
Setup screen, OR press and hold the Wi-Fi Protected Setup button on
the top panel of the extender for one second. When the connection is
complete, the Wi-Fi Protected Setup light on the extender will be solid.
3. If using the extender's Wi-Fi Protected Setup screen, be sure to click OK
within two minutes or you will have to start over.
Connecting with the client device's PIN
Use this method if your client device has a Wi-Fi Protected Setup PIN (Personal
Identification Number).
1. Enter the PIN from the client device in the field on the extender's Wi-Fi
Protected Setup screen.
2. Click Register on the extender's Wi-Fi Protected Setup screen. When the
connection is complete, the Wi-Fi Protected Setup light on the extender
will be solid.
3. Click OK on the extender's Wi-Fi Protected Setup screen within two
minutes or you will have to start over.
Connecting with the extender's PIN
Use this method if your client device asks for the extender's PIN.
1. On the client device, enter the PIN listed on the extender's Wi-Fi Protected
Setup screen. (It is also listed on the product label on the bottom of the
extender.) When the connection is complete, the Wi-Fi Protected Setup
light on the extender will be solid.
2. Click OK on the extender's Wi-Fi Protected Setup screen within two
minutes.
7