Kohler K-2191 Instrucciones De Montaje página 3

Spout
Centerline
1. Preparation
Install the water supplies and drain piping.
NOTE: The sink displayed in the illustration may differ from your
actual product.
Wall-Mount Bracket Installations
Install the sink according to the instructions packed with the
bracket.
Countertop Installations
Position the template on the countertop.
For Wall-Mount Faucets: Provide sufficient spout overhang into
the sink basin. The faucet spout length must be at least 5" (127
mm) to provide proper performance.
For Countertop Faucets: Pay special attention to the spout and
handle fit clearance when locating the faucet. Use the template to
locate the faucet spout hole centerline on the countertop. This
centerline is recommended to provide adequate clearance
between the edge of the sink and the spout.
Check for adequate clearance between the backsplash, faucet
spout and handles, and sink. Kohler Co. recommends a clearance
of at least 1" (25 mm).
Refer to the faucet installation instructions for required clearance,
and mark the preferred faucet hole locations using a soft lead
pencil.
Kohler Co.
Backsplash
1" (25 mm) Minimum
Clearance
1" (25 mm) Minimum
Clearance
Cut-out
Line
Outside
Edge of the
Sink
3 1018373-2-D