INFOSEC UPS SYSTEM E6 LCD RT Evolution TX 5 KVA Guia Del Usuario página 9

Ocultar thumbs Ver también para E6 LCD RT Evolution TX 5 KVA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

To install in 6U, it's not necessary to use short extensions.
Step 1
Assemble two feet and two
long
extensions
together.
Then, one set of plastic
supporter with 26cm width is
done.
Another
set
supporter
could
assembled in same way.
Install UPS module with ISO bank and one battery bank in 6U
Step 1
Assemble two feet and three
long extension -s with one
short extension as one tower
stand.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - [email protected] – 05 13 AA 59 206 14
All manuals and user guides at all-guides.com
Step 2
Align
the
two
approximately 35cm apart in
of
step 2.
be
Step 2
Align
the
two
approximately 35cm apart
Step 3
Then, put UPS module and battery bank
in the stands as shown in step 3. Be
stands
sure that the LCD of UPS should be on
upper half part of front panel. And
assemble these metal plates and M4
screws as shown in step 4.
Step 3
Then, put UPS module, ISO bank and
stands
battery bank in the stands. And assem -
ble these metal plates and M4 screws
9
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

E6 lcd rt evolution tx 6 kvaE6 lcd rt evolution tx 8 kvaE6 lcd rt evolution tx 10 kvaE6 lcd rt evolution tx 5 kva sE6 lcd rt evolution tx 6 kva sE6 lcd rt evolution tx 8 kva s ... Mostrar todo

Tabla de contenido