Packard EHR-2080 Guia Del Usuario página 23

has been reached, the buffer will be progressively overwritten. If you need to keep the video contained in this
buffer for future usage, you can save all or part of the buffer.
Save
To save video data in Time Shifting buffer:
While viewing a program, press the REC/OTR button. This will start saving the segment your are watching.
You can navigate forward. During the saving operation, by pressing the REC/OTR button, you will increase
the length of the program you are saving by 30 minutes. Press Stop to indicate the end of the saving
operation. The saved part of the time shifting buffer will be displayed in red.
Note: You cannot change the channel or the source if a recording is active (if the end of the recording segment
has not been entered, or in the case of long recording, it has not been reached). If you attempt to change the
channel or source, the Easy HDD Recorder will prompt you to stop recording. The segment will be saved on
HDD and then the channel or source will be changed.
Note: Only one segment in the Time Shifting buffer can be identified for saving. It is not possible to identify
multiple segments. Once the segment has been saved and registered on HDD Title list, then this segment (and
any recording before the segment) will be removed from the Time Shifting buffer.
Note: If you are using SETUP->TimeShift->Time shift buffer mode->Preserve, you can only save a segment
from the a single source or channel - you cannot save a sequence of channels. In this case, saved programs will
be removed from the Time Shifting buffer when Stop is pressed. The Easy HDD Recorder will SAVE the Time
Shifted programs immediately if the system is powered down.
While in Time Shifting mode, you can use the following buttons for other operations:
Button Result
HDD HDD title list
DVD Play disc
EJECT Open/close the tray
POWER Power off
Setup Bring up SETUP menu
SOURCE Change the video source
Note: (option: SETUP->TimeShift->Space Management->Automatically). If no more space is available on the
HDD before a recording is stopped, the Easy HDD Recorder will erase the oldest (un-protected) titles on the
HDD. It will not erase titles that are selected to be copied to DVD. If despite this procedure, there is no space
on the HDD to record, the recorder will stop recording and display a prompt to erase some titles and make
more room on the HDD.
Note: (option: SETUP->TimeShift->Space Management->Manually). If no more space is available on the HDD
before a recording is stopped, the recorder will stop recording and display a prompt to erase some titles and
make more room on the HDD.
You can use the SETUP->TimeShift->Empty hard disk option to erase all contents on the HDD. Please
proceed with caution, as this process is irreversible. The recorder confirm that you want to erase all contents.
All manuals and user guides at all-guides.com
Note
Recording continues
Recording continues unless you want to record to DVD
Recording continues
Recording continues
English -
23