Scan For Tv Channels - Packard EHR-2080 Guia Del Usuario

Press the Navigation button of the remote control to display the screen on the right.
1. Switch to DVD Playback Mode.
2. Switch to TV/VIDEO Mode.
3. Switch to System Setup Mode.
4. Switch to Timer Record Mode.
5. Switch to USB Playback Mode.
6. Switch to HDD Playback Mode.

Scan for TV channels

If you want to watch or record TV programs, you must first perform a
TV channel scan:
• Press the Setup button to access the system menu when the play-
back is stopped.
• In the Recording section use the arrow buttons (Up/Down) to highlight the
then press the Select button to view the country list.
• Choose your country from the list and press the Select button.
• Use the arrow buttons (Up/Down) to highlight
• Use the arrow buttons (Up/Down) to highlight
Channel Edit
the menu.
Note: If you are using the Time Shifting features, turn Time Shifting off before continuing.
Modify Channel Information Menu
Program Number: The number of the current channel, this item can not be modified.
Name: Use the arrow buttons (Up/Down/Left/Right) to select and edit channel name.
Standard: The transmission standard of the current channel. You should choose the correct standard
according to the local TV signal.
Search type: Use the arrow buttons (Up/Down/Left/Right) to select scan mode. There are two modes:
Frequency and Channel
Band: The band of this channel. You can select
Channel: Use the arrow buttons (Up/Down/Left/Right) to select and edit channel name.
Fine tune: Fine tune current channel.
Delete: To delete the current channel from the channel list.
OK: Confirm the settings for the current channel and save.
Cancel: Discard current settings and exit the menu.
• Use the arrow buttons (Up/Down) to select
channels.
• Use the arrow buttons (Up/Down) to select the channel you want to sort, press the Right button to con-
firm your selection. The selected channel will be temporarily moved to the panel on the right. Use the
Up/Down buttons to move the selected channel to the desired position and press the Left button to
insert it into the channel list.
All manuals and user guides at all-guides.com
APS
Modify channel
. In Frequency mode, the Band item will not be displayed.
Standard
Program Table
Country Selection
and press the Select button to start scanning.
, and press the Select button to access
Cable
or .
, and press the Select button to sort the TV
icon, and
English -
15