Grizzly Tools EKS 2440 QT Traducción Del Manual De Instrucciones Original página 127

use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a haz-
ardous situation.
h) If the power cable for this equipment
is damaged, it must be replaced by
the manufacturer, a customer service
agent of the same or a similarly quali-
fied person in order to prevent haz-
ards.
5) SERVICE
Have your power tool serviced by a
a)
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
6) CHAIN SAW SAFETY WARNINGS:
a) Keep all parts of the body away
from the saw chain when the chain
saw is operating. Before you start
the chain saw, make sure the saw
chain is not contacting anything. A
moment of inattention white operating
chain saws may cause entanglement
of your clothing or body with the saw
chain.
Always hold the chain saw with
b)
your right hand on the rear handle
and your left hand on the front
handle. Holding the chain saw with a
reversed hand configuration increases
the risk of personal injury and should
never be done.
c) Hold the power tool only on the in-
sulated handle surfaces, as the saw
chain can come into contact with
concealed power lines or the mains
cable to the equipment. Contact
between the saw chain and a live wire
can make metal parts of the equip-
ment live and cause an electric shock.
d) Wear safety glasses and hear-
ing protection. Further protective
equipment for head, hands, legs
and feet is recommended. Adequate
protective clothing will reduce personal
injury by flying debris or accidentaI
contact with the saw
e) Do not operate a chain saw in a
tree. Operation of a chain saw white
up in a tree may result in personal in
jury.
Always keep proper footing and
f)
operate the chain saw only when
standing on fixed, secure and level
surface. Slippery or unstable surfaces
such as ladders may cause a loss of
balance or control of the chain saw.
g) When cutting a Iimb that is under
tension be alert for spring back.
When the tension in the wood fibres is
released the spring loaded Iimb may
strike the operator and/or throw the
chain saw out of control.
h) Use extreme caution when cutting
brush and saplings. The slender
material may catch the saw chain and
be whipped toward you or pull you off
balance.
Carry the chain saw by the front
i)
handle with the chain saw switched
off and away from your body. When
GB
chain.
127