Idiomas disponibles
Idiomas disponibles
CAUTION
These safety goggles do not provide unlimited eye protection. For your own protection read these
instructions completely before using this eye-protection.
FIELD OF USE
This safety goggle is designed to protect the user against eye injuries through mechanical impact,
flying particles and eye injury from exposure to strong light during gas welding. Not suitable for
welding types such as TIG MIG (shielding gas) ect.
MATERIAL DECLARATION
No parts of the eye-protector which are in contact with the wearer shall be made of materials which
are known to cause any skin irritation.
STORAGE
When not in use, it is recommended to store the safety goggle in a clean and dry polybag or case for
optimal protection.
CLEANING, MAINTENANCE, DISINFECTIONS
To maintain your goggle in good condition:
1. Do not use abrasive materials, clean and rinse in warm soapy water and dry with a soft cloth.
2. Any part of eye-protector which are in contact with the wearer shall be disinfected by alcohol.
DURATION OF USE
Inspect for damage regularly. When the frame has become hard and brittle, the safety goggle should
be replaced.
MARK
The appropriate markings can be found on the lens and frame at the top.
* CE mark with significant code of the testing agency concerned.
Manufacturer Mark
I
Optical classification
F
Mark of Protection against high-speed low energy corpuscles (45m/s)
CE
CE mark
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
