General Characteristics; Technical Data - Würth PLASMAX DUO Instrucciones De Uso

GB
immediate vicinity of the welding area.
- cool the welded material or let it cool before
touching it or putting it in contact with combustible
material
- never use the machine for welding containers of
potentially inflammable material. These containers
must be completely cleaned before they are
welded.
- ventilate the potentially inflammable area before
using the machine.
- do not use the machine in atmospheres
containing high concentrations
inflammable gases or combustible vapours.
GENERAL
CHARACTERISTICS
The Inverter power source supplies adjustable
continuous current to provide maximum cutting
performance.
The Inverter has been designed with the latest
advanced technology available, providing the
following advantages:
- Low weight to allow maximum ease of handling.
- The inverter technology allows a stable arc to be
obtained, which ensures high cutting quality for a
great variety of metals and thicknesses.
- The pilot arc can perforate painted or rusty
metals.
- The continuous pilot arc allows easy cutting of
perforated materials; the pilot arc is transferred to
the piece that is to be cut when the torch is about 3
mm. away from the cutting surface.
- The regulating potentiometer, positioned on the
front panel, sets the cutting current of the machine.
- The Inverter operates with compressed air .
The air used must be free from impurities, oil or
other polluting substances.
DELIVERY OF THE MATERIAL
The package contains:
- N. 1 Inverter
- N. 1 instructions manual
- N. 1 torch
- N. 1 earth cable
Check that all the material listed above is included
in the package. Inform your distributor if anything is
missing.
Check that the Inverter has not been damaged in
transport. If you see any sign of damage, consult
the COMPLAINTS section for instructions.
Before working with a PLASMAX DUO Plasma
Inverter, read the SAFETY and USE section of this
manual.
18
COMPLAINTS
Complaints for damage during transport: If your
equipment is damaged during transit you must
present a claim to the carrier.
Complaints for faulty goods: All the equipment
shipped by WURTH is subjected to strict quality
control. However, if your equipment does not work
properly,
dealer.

TECHNICAL DATA

of powders,
A
B
a) IDENTIFICATION
Name, address of the manufacturer
Type of Plasma machine
Identification with reference to serial number
Symbol of the type of Plasma machine
Reference to the construction standards
b) WELDING OUTPUT
Symbol of the work process
Symbol for Plasma machines suitable for working in
an environment with a high risk of electric shock.
Symbol of the cutting current
Assigned no-load voltage (mean voltage)
Range of the welding current
Values of the intermittent cycle (in 10 minutes)
Values of the assigned cutting current
Values of the conventional loaded voltage
c) POWER SUPPLY
Power supply symbol (number of phases and
frequency)
Assigned power supply voltage
Maximum power supply current
Maximum effective power supply current (identifies
the line fuse)
d) OTHER CHARACTERISTICS
Degree of protection .
consult your auPLASMAX DUOise