Kohler K-2816 Guia De Instalacion página 3

Before You Begin (cont.)
For Undercounter Installations
Undercounter lavatories should be installed by experienced
installers.
Do not use adhesives or adhesive sealants with this product.
Install so future removal from underneath the countertop is
possible. This will avoid countertop damage.
For Tile-in Installations
Due to the variety of installations possible with this lavatory, you
may need to use procedures other than those described.
Remember, because of the variety of tile available, you must take
careful measurements prior to installation.
It is very important that the proper materials are used with your
lavatory. Proper selection of tile is critical for a good installation.
3/8" (1 cm) tile is recommended. Because of the variance in tile
thickness, your carpenter, tiler, and plumber must all be aware of
the exact type of tile you choose.
It is very important that the proper materials are used with your
lavatory. Proper selection of tile is critical for a good installation.
Because of the variance in tile thickness, your carpenter, tiler, and
plumber must all be aware of the exact type of tile you choose.
After selecting the tile, provide a sample to each contractor
involved in the project. It is very important that the carpenter,
tiler, and plumber maintain good communication and discuss
requirements.
1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
Undercounter Installation
NOTE: You may require different, more specialized tools to install
this lavatory to countertop materials other than wood or wood
composites.
NOTE: Install so future removal from underneath the countertop is
possible to avoid countertop damage.
Kohler Co. 3 1018893-2-C