Set Up - Sony CSS-HD2 Manual De Instrucciones

Set up
Preparing the Cyber-shot Station
1
Select a station plate.
The station plates have a front side and bottom
side.
Front side
Bottom side
Select the station plate corresponding with your
camera.
Model name Plate name
DSC-T300 HD2-A
DSC-W110
DSC-W115
DSC-W120 HD2-B
DSC-W125
DSC-W130
DSC-W150
HD2-C
DSC-W170
DSC-W300 HD2-D
DSC-T2
DSC-T70 HD2-E
DSC-T75

Attach the station plate.
 Hold the station plate on the front side (the
side with the Sony logo) facing you, and place
it on the I/O unit of the Cyber-shot Station
as if you place it over the protection cover
attached on the I/O unit.
1-GB
Sony logo
Plate name
Sliding
direction
Right
Left
Left
Left
Right
Using a right-sliding station plate (such as
HD-A)
Using a left-sliding station plate (such as
HD-B)
 Hold the Cyber-shot Station with one hand.
Hold the camera side guide of the station
plate with the other hand and slide the station
plate until it is pushed in all the way.
See the table in step 1 for the sliding direction.

Sliding to the right
Sliding to the left