Intended Use; Safety Informations - BGS technic 1773 Instruction Manual

Cooling System Bleeding and Filling Tool
COMPONENTS
1 Gauge
2 Air inlet
3 Hose connection (small)
4 Shut-off valve
5 Universal adaptor
6 Coolant hose coupler
7 Hose (small)
8 Coolant hose
9 Coolant shut-off valve
10 Coolant suction side

INTENDED USE

This air tool is used to fill and purge car cooling systems.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

SAFETY INFORMATIONS

When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
•
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
Keep the work area clean, organised, dry and free from other materials.
•
Do not allow untrained persons to work with this product.
•
Make sure that the steps in the work instructions listed below are followed when connecting
the product to the compressed air system.
•
Do not carry out any modifications on the tool.
•
Use only accessories that are dimensioned for use with compressed air tools.
•
Disconnect the tool from the compressed air supply before installing accessories, when
carrying out maintenance work or the device is not being used.
•
Maintain the tool with care. Check hoses and compressed air connections at regular intervals.
•
Do not use the tool if it is damaged. Have the tool repaired by specialist personnel.
•
Store the tool in a dry and safe location out of the reach of children.
OCCUPATIONAL SAFETY
Always wear suitable protective equipment when using pneumatic tools.
Always wear anti-slip safety shoes, work gloves
and approved safety glasses if you are working
with pneumatic tools.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
BGS 1773
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed