Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TDC Dial Indicator for Ignition Adjusting
COMPONENTS
1 Dial indicator
2 Adaptor M14
3 Adaptor M10
4 Dial indicator holder
5 Extension
6 Measuring pin, middle
7 Measuring pin, long
8 Measuring pin, short
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This TDC dial gauge is used for exact setting the piston to the top dead center and allows precisely
adjusting the ignition timing.
SAFETY INFORMATIONS
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Beware when working on running engines, loose clothing, tools and other things might be
caught up by rotation parts, which can lead to severe personal injuries.
• Remove the ignition key before working on the engine. This way you avoid an unintentional
starting of the engine
• Store the tool in a dry and safe location out of the reach of children.
DIAL INDICATOR
8 Measuring pin, short
9 Graduations 1/100 mm
10 Graduations 1 mm
11 Adjustment ring fixing screw
12 Adjustment ring
13 Fixing sleeve
14 Measuring pin holder
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
for Motorcycles
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 8319
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
