Safety Instructions - Douwe Egberts Cafitesse 500 Instrucciones De Uso

SAFETY INSTRUCTIONS

Before putting the dispenser into
operation, the operating instructions
must be read and understood.
The dispenser should not be
installed outside.
The dispenser must be placed
where it can be looked after by
trained personnel.
The dispenser should not be installed
on a surface near to where jets of
water are used (e.g. for cleaning).
After the dispenser has been
installed, the power supply plug
must be accessible.
Rinse the dispenser before putting into
operation for the first time (see chap.
Maintenance)
The liquids delivered by the
dispenser are very hot!
In order to prevent scalds, take
your hands and other parts of the
body out of the delivery area
before pressing any delivery
button.
The drinking water quality must be
checked prior to the delivery of
cold beverages.
Observe the rules and regulations
of the country where the dispenser
is installed.
Series 03
05.01
All manuals and user guides at all-guides.com
Never touch the power supply plug
with wet hands or plug it in if the
plug itself is wet.
If the power supply cable of the
dispenser is damaged it may only be
replaced by a workshop named by the
manufacturer. Special tools are needed
for the replacement.
Regular cleaning of the dispenser is
necessary for functional and hygienic
reasons.
When cleaning, take care of sharp
edges. There is danger of injuries!
Switch off the ON/OFF switch before
cleaning the dispenser.
Clean the dispenser inside and outside
with a wet cloth; do not spray it off.
To clean the housing only use
cleaning agents approved by the food
industry.
To clean the box and the combi-trough
only use the special Cafitesse cleaning
agent.
When cleaning the combi-trough
do not bring into close contact with
magnetic cards or credit cards as
this can invalidate them.
There is great danger of being in-
jured if the plexiglass panel at the
front is cleaned improperly and
breaks.
Safety instructions
When connecting the dispenser to the
drinking water line and the electric
line, follow the local regulations.
The dispenser must be connected to
an electric circuit which is protected by
a fuse.
We recommend to install a fault
current safety switch.
The connection must be made using a
safety plug earthed according to the
regulations.
Follow the local regulations!
If the dispenser will not be used for a
longer period of time (e. g. at night or
during the weekend), close the water
cock. Switch off the ON/OFF button.
Do not pull out the power supply plug
because otherwise the cooling system
will not function any more.
The dispenser must not be used when
the water supply is interrupted
because otherwise the boiler will not
be filled.
Do not switch off the dispenser be-
tween beverage deliveries in order to
keep the optimum water temperature
in the boiler.
Use only original spare parts.
The dispenser must be installed/
programmed and repaired by trained
Service Technicians only.
3