Operation; Putting Into Operation - Douwe Egberts Cafitesse 500 Instrucciones De Uso

1
PUTTING INTO

OPERATION

Open the water cock.
Plug in the power supply plug.
Open the cover of the cooling
compartment (fig 6).
Switch on the dispenser with the ON/
OFF button (1). 'On' will be displayed.
(fig. 6)
If an accounting system is connected
the display shows "FREE" or "PAY".
Series 03
05.01
All manuals and user guides at all-guides.com
A
B
.
6
The low temperature indicator lights
yellow when the boiler is cold. When
the flexi pack is empty, the empty
indicator will light red, and the flexi-
pack has to be replaced.
If necessary, switch the dispenser off
and on after replacing the flexi packs.
When the cooling compartment is too
warm for putting the dispenser into
operation, the warning message Code
8 will be displayed. The fault indication
will be displayed until the cooling
compartment has the correct
temperature, which can take a few
hours.
.
.
7
If the dispenser is in operation the
display shows alternating the cooling
temperature in degrees centigrade (A)
and the ON/OFF (B) status. (fig. 7)
If the dispenser has been out of
operation for a long period of time, put
a collecting vessel underneath the hot
water outlet, actuate the hot water
delivery button (1) and let at least 10 l
flow out before using the dispenser.
(fig. 8)
Operation
1
8
9