Technical Description; Connecting The Inverter - Waeco SinePower SP150 Instrucciones De Uso

720.book Seite 17 Donnerstag, 29. September 2005 3:59 15
All manuals and user guides at all-guides.com
SinePower SP150
5

Technical description

The inverters can be operated wherever there is a 12 V DC socket (720-
012PP), such as a cigarette lighter, or a 24 V DC supply (720-024PP).
The maximum constant output of the 720-012PP and 720-024PP inverters is
150 Watts. Devices requiring a higher output may not be connected.
Note
Note when connecting devices with an electrical drive (such as
power drills and refrigerators), that they often need more power
than is stated on the type plate.
6

Connecting the inverter

The inverter is connected via a plug connected to a 12 V socket (720-012PP)
or a 24 V supply (720-024PP). The middle pin of the plug must be connected
to the positive wire (See fig. 1.4, Page 3) and the two side brackets of the
plug must be connected to the negative wire (See fig. 1.5, Page 3).
Caution!
Make sure the plug is firmly connected in the socket. If the con-
nection is not sufficiently firm, the plug may heat up.
Caution!
The rating of the socket, the supply cable and the fuse must be at
least 15 amps. Do not put in a fuse with a higher rating.
Technical description
17