Troubleshooting - Orbis VIARIS COMBI + Manual Del Usuario

TROUBLESHOOTING

Problem
The charger is powered, and no
plug connected and with the light
indicators off.
Charger connected to the vehicle,
the status bar is solid green and
does not charge.
Charger connected to the vehicle,
the status bar is in flashing green
and does not charge.
Charger connected to the vehicle,
the status bar is flashing green and
when the RFID card passes the
charger emits 5 "beeps" and the
status bar flashes red and returns
to solid green.
Charger connected to the vehicle,
the status bar is in solid blue and
does not charge.
Charger connected to the vehicle,
the status bar is in blue of varying
intensity and does not charge.
Charger connected to the vehicle,
the status bar is in flashing blue
and does not charge.
Charger connected to the vehicle,
the status bar is solid red and does
not charge.
Solution
Check the power according to the
connection scheme and that the
protections are activated.
Power down the charger, wait
approximately 10 seconds and restart
the charger
There is no communication between
the vehicle and the charger.
Check the cable is correctly inserted
into the vehicle and charger.
Ensure cable is not damaged.
Unauthorized RFID user
Check the list of authorized cards.
Unauthorized RFID user
Check the list of authorized cards
Check that there is no time schedule
on either the charger (
vehicle.
The vehicle may be in standby mode.
Open the vehicle door to exit the
standby mode.
The load modulator icon (
the installation does not have enough
power to charge the vehicle.
The vehicle has finished charging,
check that the battery is full or that
the vehicle has no time schedule.
Error; turn off the charger from the
protections and switch back on.
82
) or the
) is on;