Set The Date - Carl F. Bucherer PATRAVI T-GRAPH Manual Del Usuario

Set time
In order for the date to properly move at midnight,
the hour hand must intentionally be set to a.m. or
p.m. based on the current time.
1 Pull the crown until it is in
position 3. the second hand
does not move.
2 Move the crown counter-
clockwise until the date
changes. then deliberately
set the current time either
a.m. or p.m.
3 Push the crown back into
position 1. the second hand
is back in motion.
En 8

Set the date

Warning: Do not use the quick set function for the
date between 8:00 p.m. and 2:00 a.m. because
there is no assurance that the date will change at
midnight after that; it may not change for another
24 hours.
1 Pull the crown into position 2.
2 set the current date by
rotating the crown counter-
clockwise.
3 Press the crown against
the case and simultaneously
turn clockwise until it is
firmly secured.
Measure time (chronograph)
the chronograph can be used to measure exactly
1/ 8 second time intervals for up to 30 minutes.
the time measured can be read using the second
and minute counters.
1 start measuring time using
the P1 pusher. the seconds
counter is in motion.
2 to stop measuring time,
press the P1 pusher again
and read where it stopped.
3 use the P2 pusher to reset
all the counters to zero.
9 En