Set The Date - Carl F. Bucherer MANERO RETROGRADE Manual De Instrucciones

Set day of the week
the concept of the calendar mechanism requires
that the day of the week be entered, followed by
the date.
1 Pull the crown until it is in
position 2. the second hand
does not move.
2 set the current day of the
week by rotating the crown
counterclockwise. then set
the current time.
En 8
Set time
In order for the date to properly move at midnight,
the hour hand must intentionally be set to a.m. or
p.m. based on the current time.
1 Intentionally set the
current time at a.m. or p.m.
by rotating the crown.
2 Push the crown back to the
initial position. the second
hand is back in motion.

Set the date

1 Pull the crown into position 1.
2 set the current date by
rotating the crown counter-
clockwise.
3 Push the crown back to the
initial position.
Set the 24-hour indication
the second time zone must not be set directly
after the time is set if the minute hand is being
pushed counterclockwise. You should wait about
30 minutes to set the second time zone.
1 use a corrector pin to press
corrector A repeatedly until
the hand is on the desired
hour.
9 En