Mounting/Installation; Attaching The Knob - KLS Martin group MedLED Instrucciones De Uso

4 Mounting/Installation

If only the visor needs to be attached, please follow the instructions from chapter 4.3, "Attaching the
visor", page 28.
4.1

Attaching the knob

Remove the existing headband padding.
Wipe the front of the headband (with 70%
isopropyl alcohol solution to remove any oil and
residue).
Remove the protective film from the back of the
knob.
Attach the knob to the headband:
• Chrome:
attach behind the 5th hole (from the light) in
the central row of the headband and press
down firmly.
• Ensure that the knob is angled slightly upwards.
Sapphire & Onyx:
attach 2.5 cm from the edge of the light.
Repeat the process on the other side of the
headband.
26
MedLED® face shield
Instructions for Use
Revision 01