Specifications; Mount The Ventilator - Aprilaire 8144NC Manual Del Usuario

SPECIFICATIONS

Airflow: 20-160 CFM
Filter: MERV 6 washable
FIGURE 1 – DIMENSIONS (INCHES)
10 3/4"
10 1/4"
90-2312

MOUNT THE VENTILATOR

1. Mount the blower with the lowest, exposed moving parts at least 8
feet (2.4 m) above floor or grade level.
2. Mount the blower at least 3.3 feet (1.0 m) from an accessible
opening of the duct.
The ventilator can be mounted in any orientation. Avoid locations that
block wiring access openings in the housing and ensure that location allows
sufficient clearance for filter maintenance and service. See FIGURE 2.
1. Install the mounting brackets in the designated holes in the housing
using the supplied #8 x 1/2" screws.
Screwing the brackets or any other hardware into any other
location but the designated mount location may cause damage and
invalidate the warranty.
2. Secure the unit to joists or a strong platform (do not install directly to
drywall only as the ventilator weighs approximately 20 pounds) using
the #10 x 3/4" screws provided.
10 1/4"
3 1/8"
CAUTION
CAUTION
15 3/4"
18 1/8"
FIGURE 2 – LOCATION CLEARANCES
WIRING ACCESS
OPENING – BOTH
SIDES OF HOUSING
FILTER
9" MIN
CLEARANCE FOR FILTER
90-2313
13 1/16"
2 7/16"
English 3