Technical Data; Techinical Data; Standard Configuration; Generating A New Transmission Code - ELICA SUT950 Guía De Instalación, Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SUT950 - SUT951
Remote control
A:
At
every
selected
ghts on accordingly.
B:
To increase the speed.
C:
To switch on the lights or to switch
off.
D:
ON/OFF To go from a higher speed
first one press twice the but
the hood on or off
press once this button.
E:
To reduce the speed.
F:
To set the timer.
fig. 4
The led on the right side will start (eve­ry 5
seconds), the hood will work for 10 minutes at
the
selected
speed
automatically off. If the client in­creases or
reduced the speed while the ti­mer is on, this
is automatically stopped.
All manuals and user guides at all-guides.com
function,
the
led
li
them
back to
ton: To switch
and
then
it
lights

TECHNICAL DATA:

Alkaline battery powered: 12v mod. 23A
Operating frequency:
433.92 Mhz
Combinations:
4096
Max. consumption:
25Ma
Operating temperature:

Standard configuration.

If two cooker hoods<radio control system are
installed in the same room or in the immediate
vicinity, each system may af­fect the operation
of the other, due to the fact that they have the
same code. The­refore it will be
change the code of one of the radio controls.

Generating a new transmission code.

The
radio
control
is
ma­nufacturer with default codes stored. If you
want to create a new set of codes, proceed as
follows: press and hold the UP, STOP and DOWN
buttons simulta­neously for 2 seconds. After the
LEDS li­ght up, press the UP and DOWN buttons
within 5 seconds. The LEDS will flash 3 times to
indicate
that
the
process
WARNING: This procedure dele­tes all previously<
stored codes.

Learning the new transmission code.

After
changing
the
transmission
radio
control,
the
cooker
control unit must be made to set the new code as
follows: press the main Power Off button on the
coo­ker
hood
and
then
electronic
control
unit.
seconds,
press
the
Light
ensure the control unit is synchronized with the
new code.
<20° : +55°C
necessary to
supplied
by
the
is
com­pleted.
code
on
the
hood
electronic
restore
power
to
the
Within
the
next
15
button.
This
will
11
Tabla de contenido
loading

Este manual también es adecuado para:

Sut 951

Tabla de contenido