PROG. + STANDBY - Programming deletion (only for General Blinds Control)
Press simultaneously the PROG. and STANDBY keys for 5 seconds until the LED
start blinking. Press the desired function (
Programming of the IR Remote Control Transmitter Multifunctions
Press the
or
Transmitter the corresponding button. The LED goes off and the command will be
programmed. To deprogram proceed in the same way.
CHARACTERISTICS
100-240V~; 50/60Hz; 5A (cosφ = 1).
Consumption: <0,5W.
Standby Consumption: <0,15W.
Local command or remote control by the Infrared Remote Control Transmitter
Multifunctions (Ref. 81900).
Battery back up: 24 hours.*
It allows to receive sensors signals 100-240V~ (PR1 e PR2).*
2 programming functions (up or down).*
STANDBY function.*
* Only for the General Blinds Control
14
, key until the corresponding LED starts to blink. Press on the IR
or
).