Use Instructions - Efapel 21311 Manual Del Usuario

BLINDS CONTROLS
DESCRIPTION
They allow manual or automatically, the general or individual control of blinds,
according to the programmed schedule or the surroundings conditions (ambient
light, wind, etc.), measured by associated sensors. They can be operated at the
local or remotely by using an IR transmitter (Infrared transmitter).

USE INSTRUCTIONS

- Up - Down
Press the key or
press the same key.
PROG. (only for General Blinds Control)
Press the PROG. key until the LED start blinking. Press the desired function (
or - down functions) the corresponding LED to the programmed function will
blink. The programmed function will be repeated after 24 hours.
STANDBY - Programming suspension (only for General Blinds Control)
The STANDBY function allows suspending the programming without deleting it.
It can be reactivated without being necessary a new programming. To activate or
deactivate the stand-by function, press the STANDBY key for 5 seconds and then the
corresponding function key which programming is supposed to be suspended. The
corresponding LED will blink at shorter time intervals. To suspend both functions, press
the STANDBY key for 5 seconds and then both keys (
to up or down the blind. To stop the movement at any time,
- up or - down functions).
EN
- up
13