Package Contents; For Your Safety - BenQ WiT Guia Del Usuario

Package Contents

Check the packaging for the following items. If any is missing or damaged, please contact the place
of purchase immediately.
• WiT e-Reading Lamp x 1
• Pedestal base x 1
• The illustrations in this guide are for your reference only and may look different from
the appearance of the product you purchased.
• The table clamp is available as a separate purchase.

For Your Safety

• Use only the supplied power adapter (WB-18D12FU) and connect only to a suitable outlet
power (100-240V AC, 50-60 Hz). Otherwise the lamp will fail to work normally or result in a
fire hazard.
• In order to prevent any damages to the lamp, do not hang or place any objects over the lamp.
• Route the power cord so as to avoid it from being walked on or pinched by items placed upon
or against it.
• Place the lamp only on a solid, flat and stable surface. Otherwise the lamp may topple over and
result in damages.
• If the lamp will not be used for a long period of time, unplug it from the power outlet.
CAUTION
Installation
Pedestal Base
1. Place the pedestal base on a solid, flat and stable surface.
2. Insert the shaft on the pedestal base into the hole on the end of the lamp arm [Figure
and then secure it by tightening the screw [Figure
3. Connect the power cord to the power adapter [Figure
[Figure
C
Table Clamp (Available Separately)
1. Place the table clamp onto the edge of the table surface [Figure
table clamp by tightening the clamp screw [Figure
of the table clamp is 6 cm.
2. Insert the shaft on the table clamp into the hole on the end of the lamp arm [Figure
and then secure it by tightening the screw [Figure
3. Connect the power cord to the power adapter [Figure
[Figure
C
In case of the following situations, unplug the lamp from the power outlet
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
• When the outer casing of the lamp is broken
• When there are strange odors coming from the lamp
• When the lamp flickers
• When the insulation of the lamp's wiring is damaged or frayed, and the metal
strings inside can be seen
Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
This lamp is designed for indoor use only. Do not use it outdoors.
Never disassemble the lamp or remove any components from it, as doing so may
result in accidents and will void the product warranty.
(2)].
(2)].
• Power adapter x 1
• User guide x 1
(2)].
A
(1)] and plug it into a power outlet
C
B
(2)]. The maximum clampable thickness
B
(4)].
B
(1)] and plug it into a power outlet
C
A
(1)] and then secure the
(3)],
B
English
(1)]
1