Registering To Another Base - Daewoo International DTD-7000 Manual Del Usuario

Using additional bases
Registering your Daewoo DTD-7000 handset to another base (max. 4 bases)
On the base:
1. Press and hold
and the In use light flashes while the handset is being registered. On the
handset: Press
2. Press or
3. Press or
4. BASE 1 2 3 4 will display. The base in which you are registered will flash.
5. Enter the number of the base you want to register to.
SEARCH 1 is displayed (where 1 is the base number you are searching for).
When the base is located, you will hear a confirmation tone and PIN? will be
displayed. The default PIN code is 0000.
6. Enter the base PIN code and press
entered the correct code and the handset returns to idle mode.
Once registered, you will hear a confirmation tone and the next available handset
number is allocated and shown in the display.
If registration is unsuccessful, after 1 minute, the handset will display the list of
registered bases and you can try again or select another base to use.
All manuals and user guides at all-guides.com
to put the base into registration mode. The base beeps
.
until REGISTER is displayed then press
until REG BASE is displayed then press
17
.
.
. You hear a tone to confirm you have